Ducati S4r Monster 1100
4 valve engine




Monster 1100 S2r Tuneboy Tuning connector location
(rh side of bike near ECU - it's not the one at the rear of the bike - Thanks. Raul Meono for the pic)

Custom installation in 415 472-4962

Ducati tuning available.

Nemesis ECU Tuning and
Tuneboy Tuning and
Microtec ECU Tuning and
Power Commanders and Rapidbike if available

EC997 Dyne System and the Hypermotard

Up to 3-4 True HP improvements all through the low, mid and upper mid with a perky 2 True HP boost on top. Sweet!
(Of course that depends on how badly your bike was programmed and how much you've changed your intake and exhaust in the first place).

While the peak hp improvement numbers are what people "look at", the biggest difference in EC997 dyno tuning (over simplistic Dynojet dyno tuning) is that with the EC997's low inertia and the realtime HP readout, we can adjust the fueling at part throttle cruise, fuel and ignition to what the engine actually "wants", rather than tuning to a so-called "AFR" that it's "supposed to want".
The result is smoother part throttle, in-town cruise and maybe even better mileage.

With the proven philosophy of "tuning to Best Power and Engine Smoothness" and experience with over 30 different FI tuning programs, we can make just about every bike run better than "AFR" tuning and can definitely make better custom maps than simply dropping in a "pre-mapped" DP ECU.

With Tuneboy Software and Nemesis or Microtec ECU's, you can buy that non-Ducati exhaust system and eliminate the need for the DP ECU.
Also - if you've had your Hypermotard custom tuned somewhere, and it still isn't as smooth or responsive as you think it could be, give us a call or email and we can set up a diagnostic dyno test with the 5 gas EGA.   Thanks - Marc

contact email

Performance Friction / PFC Brake pads - bite or linearity  when when you want it - your choice.
Off Highway Brake Pads  
 
Click here to open a new window and
go to Factory Pro's Performance Friction Brakes page

Quietly winning championships for 30 years.


questions? marc@factorypro.com
Factorini Provente Microbearing Shift Kit - quicker shifting and virtually eliminate missed shifts.
Combine the Shift Kit and the Lightweight Centering Spring for the ultimate.

Lightweight Shift Centering Spring
$49.95

Click Here to buy


SPECIAL INTRO!
$39.95


Just rode bike awesome shifting, smooth, smooth smooth
thanks
Mike Hoak
August 2013

Lightweight Shift Centering Spring



For when you decide that you want lighter feeling shift lever action for better feel.
A lighter foot shift pressure is less unsettling.
Decreases lever effort required to make a shift.
 Makes foot shift pressure more like other sportbikes.
Since you are not having to push so hard to move the lever, it's easier to find neutral.

Like your rearsets? But, no matter how you lube, shim, adjust the arcs, angles and lengths, it's still annoyingly stiff to shift?
 

SHFT-PRO-D748/S4r,M1100-CER
$139.95
Hybrid Ceramic Mircrobearing F-Pro detent arm and F-Pro spring

1. Choose your shipping method

2. 




right under the clutch

The
s
tock arm to left, Factory Pro MicroBearing to right
45520031A




    May 23, 2013   From Leigh Thomas
Heather rode her bike for the 1st time since I put the shift kit in. I asked if she liked it, this was her response.
"Yes! Much better. Much smoother. Thank you. :)"

Factorini Provente

Hybrid Ceramic Pro Shift Kit

Love the bike? Wished it shifted better? Hard to find neutral?

MotorcycleUSA  1198
"While Ducati has improved the transmission on the bike over the years, compared to its rivals, the bike has more throw and a notchier feel, Sorensen remarks...................... but when compared to the others it is not as slick and takes a good deal more effort"

The famous Factorini Provente Shift Kit is now available for the Ducati Twins.

Factorini Provente designed and manufactured Microbearing Detent Arm and F-Pro designed Detent Spring will firm up the shift feel and virtually eliminates missed shifts - both upshifting and downshifting and neutral is easier to find.

Trackday and race bikes

Eliminates the need for that old, annoying "ducati trick" of removing the "really kinda necessary" neutral detent that was done to quicken up the shifting on trackday and race bikes - all too often...... (did I mention that when I put a bike in neutral on the dyno, that I really prefer it to STAY in neutral and not "wander into 1st gear by itself? :-)

Shifts quicker.  Misses fewer shifts.
Perfect to install when working on the clutch.
Feels loads better.


You need to decrease Shift Kill time by 5ms to 10ms if using a quick shifter.
.........................................

Remove the clutch assembly, remove the RH engine cover  - bolt in the kit.

Includes: Factorini Provente Hybrid CERAMIC Microbearing Detent Arm and F-Pro Detent Spring.
(This kit does not include a clutch cover gasket)

Installation: Less than 2 hours to install with impact wrench and large socket set.

Can I install it myself?  Yes - If you can remove the clutch assembly, you can do this.

..........................................

2010 Sept 16 Bob Hunter wrote

Marc,

 Good positive feel to all gears up and down, biggest improvement is selecting neutral, far better than stock.

 I can highly recommend the upgrade.

Regards, Bob

 

 

ynojet

 

 

 

Absolutely NO carb parts sold in California.

New and improved Suzuki Teka SFI  2

with new TPS display and "MMT" Memory Module Tuner

Finally - Quick, easy, cost effective Suzuki tuning with no expensive "add-on boxes"
Suzuki cruisers and sportbikes

Please click here for more info

Contact Factory Pro
M-F, 9am - 5pm, Pacific time, -7 or -8 GMT

800 869-0497
 USA and Canada

415 491-5920

parts information
 info@factorypro.com

EC997 dynamometer information
info@factorypro.com

Product Support /Tech SECTION
click here

 

Mailing / Shipping address:

Factory Pro
179 Paul Drive
San Rafael, CA 94903
USA

And most importantly
Restart back at the HOME page and click on the red box in the top left to find the bike that you want parts for...
restart at HOME page

 

This Tuning Site has been visited by
  
people.
www.digits.net - the oldest counting service on the web

          

 

 

 

LINKS
EFI and Carb Tuning - Most all FI and carb tuning

by Wheelsmith Racing

Flight Training - train with AMA race winner Todd Harrington.

The Harringtons own American Flyers, one of the most established flight training facilities in the USA.

 8 locations

 800-362-0808
The Rich Oliver Mystery School will help you discover your hidden inner strength. 
It will challenge you. It will teach you a new way of thinking, and a new way of riding. You can take your riding to an exciting new level!  

We use a variety of proven drills and training techniques. 
Practicing these techniques with our Yamaha dirt track trainers will enhance your abilities both on the track or the street.  

It doesn't matter what you ride or race, the Rich Oliver Mystery School improves everyone's skill level and mindset!

WW2 vintage flying Special

Book a sightseeing flight over the Wine Country or a Kamikaze aerobatic flight or a biplane flight over famous Sonoma Raceway, the Golden Gate Bridge and the San Francisco Bay for one or two during the spring and get a free souvenir t shirt!
(NEW!  Ask about the P-40 flights!)

707 938 2444

Just tell them that you saw this on the Factory Pro website!
Marc
Northern California's most unforgettable flying experience.  No experience required.  Open weekends!

The extension of the laboratory for engines of the Swiss Federal Institute of Technology was completed in about 1935. Its architect was Rudolf Otto Salvisberg (1882-1940). He had a successful career in Berlin but returned to Switzerland after the advent of the Nazis. His architectural style was somewhat similar to that of Erich Mendelsohn. The staircase of the laboratory is in normal use but well preserved.
Edited to the tunes of Chemical Residue by Herbie Hancock.