Honda NT650
All years and world locations

Carburetor Tuning Kits - the internet's preferred brand of kit


CRB-H04-1.0          $99.95

1. Choose your shipping method

2.

This is the kit that knocked that other jet kit company off the preferred jet kit list...

Adds more low-end / midrange, if the proper main jet is selected, more top-end power. Easy to install and tune - no slide drilling - no jet drilling.

THE choice for the best power and the straightest torque curve.


CRB-H04-1.1-TI       $119.95

1. Choose your shipping method

2.

 

Titanium needles and Stainless steel allen screws for the float bowls. Adds more low-end / midrange, if the proper main jet is selected, more top-end power. Easy to install and tune - no slide drilling! No MAJ drilling!


CRB-H04-3.0   $99.95
(carb recal only)

1. Choose your shipping method

2.

 

For the best top-end power (+2 to 4 True HP). Good low-end and midrange. Requires removal of stock airbox and running  individual air filters. Otherwise, it is a drop-in kit. Low-end response is as good as, if not better than the 1.0 kit with the stock airbox.


CRB-H04-3.0-AFK   $149.95

(includes K&N filters)

1. Choose your shipping method

2.

 

Includes individual air filters and the above matching 3.0 carb kit.

Ignition Advance Rotor - for more midrange

RTR-HON-9-04

$109.95
  
New Stock!       December 2016

1. Choose your shipping method

2.

Deep from the Lost Article Treasure Trove!

We just found a box over in R&D that was filled with BRAND NEW  Ignition Advancers!
These +4 degree FIXED Ignition Advance rotors change the timing by 4 degrees.
 

This new Factory Pro rotor advances the timing 4 degrees. With stock engines with stock compression ratios, there is more power everywhere. Part throttle power is significantly "mo better" - helping corner exit speeds. Improved highway mileage and in-town drivability.

Shift Improvement Kit - a big improvement for not a lot of money

SHFT-PRO-HON-9-CERAMIC     $139.95
(includes: new FP MicroBearing Detent Arm, custom FP slightly stronger detent spring, One 6mm shim washer and new clutch cover gasket)

1. Choose your shipping method

2.

Wake up your bike's shifting.
(everybody else has one!)

HYBRID CERAMIC Bearing

Make shifting MUCH quicker than even a new Hawk and virtually eliminate missed shifts. This is the same type of shift improvement kit that many privateers used....  Ohh.... and Yoshimura.... and Erion..... and Two Brothers...... and Honda....... and Kawasaki........

Helps prevent shift fork bending and transmission gear engagement dog and slot damage caused by missed shifts.

Includes Factory Pro MicroBearing Detent Arm, Factory Pro Shift Spring and new clutch cover gasket.

Takes 1-2 hours to install - no case splitting required - only requires a 1/2" impact wrench to remove the clutch basket.

Note:
Includes one 6mm washer to shim  pivot post to prevent spring coil bind if needed.

SHFT-PRO-HON-9     $119.95
(includes: new FP MicroBearing Detent Arm, custom FP slightly stronger detent spring, one 6mm washer and new clutch cover gasket)

1. Choose your shipping method

2.
 

Wake up your bike's shifting.
(everybody else has one!)

Standard STEEL microbearing

Make shifting MUCH quicker than even a new Hawk and virtually eliminate missed shifts. This is the same type of shift improvement kit that many privateers used....  Ohh.... and Yoshimura.... and Erion..... and Two Brothers...... and Honda....... and Kawasaki........

Helps prevent shift fork bending and transmission gear engagement dog and slot damage caused by missed shifts.

Includes Factory Pro MicroBearing Detent Arm, Factory Pro Shift Spring and new clutch cover gasket.

Takes 1-2 hours to install - no case splitting required - only requires a 1/2" impact wrench to remove the clutch basket.

Note:
Includes one 6mm washer to shim  pivot post to prevent spring coil bind if needed.

Hybrid Ceramic Wheel  Bearings


http://image2.cccme.org.cn/i_supply/2010/7/6/2010122602022725549_125637846.jpg

$279.95
Hybrid Ceramic intro special

reg $299.95

4 bearing kit
2 front and 1 rear wheel and 1 sprocket carrier bearing set

pn: BE-HYCER-H09/nt650
1. Choose your shipping method
2.
Hybrid Ceramic Wheel  Bearings

4 bearing set

Tough steel races and almost  friction free ceramic balls.


Bearings have rubber seals that are easy to remove if desired.

NOTE: Does not include:  the 91062-MR7-003 rear needle bearing.

marc@factorypro.com
Tuning Tools


TL-float height gauge  $59.95

1. Choose your shipping method

2.
 

The only way to accurately measure float heights. Works on nearly every carburetor.

NT650's across the world

donate photos:  info@factorypro.com

Russia

Aleks /  CeZet November 2013
Red Square and Kremlin

Hi Marc,
How are you?
Today I've got that I live in one of the most beautiful cities in the world and there is no real problem to get the kremlin and some sites near on bike... Only 10 minutes So I rode there and took some pics. It's the best I think (made on iPhone camera and in hands):
BR,
Alek




Aleks /  CeZet May 2012
Moskvoretskaya esplanade and on back stage well known high-riser on Kotelnicheskaya esplanade.



Aleks / CeZet  May 2012
Moskvoretskaya esplanade, back ground Kremlin and Bolshoy Moskvoretsky bridge

 

 

 

 

 

Absolutely NO carb parts sold in California.

New and improved Suzuki Teka SFI  2

with new TPS display and "MMT" Memory Module Tuner

Finally - Quick, easy, cost effective Suzuki tuning with no expensive "add-on boxes"
Suzuki cruisers and sportbikes

Please click here for more info

Contact Factory Pro
M-F, 9am - 5pm, Pacific time, -7 or -8 GMT

800 869-0497
 USA and Canada

415 491-5920

parts information
 info@factorypro.com

EC997 dynamometer information
info@factorypro.com

Product Support /Tech SECTION
click here

 

Mailing / Shipping address:

Factory Pro
179 Paul Drive
San Rafael, CA 94903
USA

And most importantly
Restart back at the HOME page and click on the red box in the top left to find the bike that you want parts for...
restart at HOME page

 

This Tuning Site has been visited by
  
people.
www.digits.net - the oldest counting service on the web

          

 

 

 

LINKS
EFI and Carb Tuning - Most all FI and carb tuning

by Wheelsmith Racing

Flight Training - train with AMA race winner Todd Harrington.

The Harringtons own American Flyers, one of the most established flight training facilities in the USA.

 8 locations

 800-362-0808
The Rich Oliver Mystery School will help you discover your hidden inner strength. 
It will challenge you. It will teach you a new way of thinking, and a new way of riding. You can take your riding to an exciting new level!  

We use a variety of proven drills and training techniques. 
Practicing these techniques with our Yamaha dirt track trainers will enhance your abilities both on the track or the street.  

It doesn't matter what you ride or race, the Rich Oliver Mystery School improves everyone's skill level and mindset!

WW2 vintage flying Special

Book a sightseeing flight over the Wine Country or a Kamikaze aerobatic flight or a biplane flight over famous Sonoma Raceway, the Golden Gate Bridge and the San Francisco Bay for one or two during the spring and get a free souvenir t shirt!
(NEW!  Ask about the P-40 flights!)

707 938 2444

Just tell them that you saw this on the Factory Pro website!
Marc
Northern California's most unforgettable flying experience.  No experience required.  Open weekends!

The extension of the laboratory for engines of the Swiss Federal Institute of Technology was completed in about 1935. Its architect was Rudolf Otto Salvisberg (1882-1940). He had a successful career in Berlin but returned to Switzerland after the advent of the Nazis. His architectural style was somewhat similar to that of Erich Mendelsohn. The staircase of the laboratory is in normal use but well preserved.
Edited to the tunes of Chemical Residue by Herbie Hancock.