Kawasaki
ZX-6e
93-01 (as "zx6e)


zzr600
 03-05, USA and Canada
 
Canada, South Africa, Australian and European models

   
Pro Shift  - virtually prevent missed shifts

 ZX6e, 93-01
ZZR600, 03-05

SHFT-ARM-K03-STEEL   $89.95

Includes Microbearing Detent Arm (does not include clutch cover gasket)

1. Choose your shipping method

2.


 Positive feedback rating    SUPER GREAT, BETTER SHIFTING,THANKS     ktmchazb

Positive feedback rating    Shifting is way more positive even when downshifting. Shifting is like a KX250 now.
I took my time installing it and it took about 2 hours. The hardest part was getting it behind the spring but with the change in shifting, it was worth the trouble.
I could change the next one in an hour.
Charlie Burk
Flora, IL



Microbearing Pro Detent Arm
Better 1-2 shifts!

Positive feedback rating    SUPER GREAT,  BETTER SHIFTING,  THANKS     ktmchazb

Positive feedback rating      installed and works great.     Adam Geraldson, Missoula, MT

"Virtually Eliminate missed shifts"

zx6d and e's can use a kit to help them not miss shifts  -
Each missed shift stresses the gear engagement dogs and slots, bends shift forks and otherwise causes extreme shock loading to the entire drivetrain.

This kit includes the Factory Pro Microbearing Detent Arm.  Does not include shift mechanism cover gasket.
1-2 hours to install.
Requires that the clutch basket be removed and replaced.
 No case splitting required.

This kit will not fix a broken transmission, but will keep a good transmission from bending forks and missing shifts.

EZ Adjust Fuel Screw Set


Extended Fuel Screw Set

$89.95

inc:
4 screws, 4 springs, 4 washers, 4 o-rings

1. Choose your shipping method

2.

"Long Boy" Fuel Screw
Finger and screwdriver adjustable
Extended Fuel Mixture Screw set

Easily adjust to fix lean decel backfiring or rich burble - or lean out the cruise for better highway mileage.

Frustrated with trying to find an "almost 90 degree"  screwdriver to fine adjust your fuel screws for best idle and cruise?
Use Factory Pro's new "finger and screwdriver adjustable" fuel screws to adjust for best throttle response. Traveling to high altitude? It's easy to lean out the lowend temporarily.

Make your life easier.

Installation:
Remove old short stock fuel screw, old o-ring, old washer and old spring. The o-ring might be stuck in the carb, so, take a light and make sure it's really out -  if it didn't come out with the screw (or you can't find it after you took out the screw)
Use a small bent wire to pull it out if it doesn't drop out.

Factory Pro finger adjustable fuel screw kit comes with:
4 Long Boy fuel screws
 4 new o-rings
4 new washers
4 new springs

part number description

 


CRB-K32-1.0     $139.95

1. Choose your shipping method

2.

STD drop-in carb recal kit

Boosts power at full throttle, improves throttle response and wheelie ability. Definitely pulls harder out of 2nd and 3rd gear corners! Good low-end and sometimes, even better mileage than stock.

Works well with all competition exhaust systems we've seen and will even work, with a bit of tech support tuning, with the VHR SS2r and similar systems.
For Vance and Hines SS2r street baffles, carb kit must be special ordered direct from Factory Pro with a "70p" needle.


CRB-K32-1.1-TI     $159.95

1. Choose your shipping method

2.

Ti Pro Kit

Same as 1.0 kit, but with Premium Titanium needles, also a drop-in kit. No slide drilling required.
 

For Vance and Hines SS2r with street baffle, carb kit must be special ordered direct with a "70p" needle.

zx6e rtr-kaw-6, no stock.

TL-float height gauge  
$59.95

1. Choose your shipping method

2.

The only way to accurately measure float heights. Works on nearly every carburetor.

General Technical Support


Feedback

Subject: final carb settings
Date: Fri, 14 May 1999 18:43:53 EDT
From: A33GOD@aol.com
To: factory2@ix.netcom.com

Dear factory,
I have spoken 3 or 4 times to your techs over the phone and I have got to say that all of the techs that I spoke with were very helpful in the tuning of my bike and more than willing to explain the affects of what I was doing. Here are my final tuning specs and I must say my bike runs really
good. Much better than I expected it to.
VHR SS2R
STOCK FILTER
FACTORY +4 DEGREES ADV.
# 35 PILOT
2.75 TURNS FUEL SCREWS
11 MM FLOAT LEVEL
0968H-70PU NEEDLES, CLIP POSITION # 3 w/ 1/2 STEP WASHER UNDERNEATH THE CLIP.
29.75 BAR. PRESS.
# 142 MAIN JET
85-90 DEGREES AVE. TEMP
80% HUMIDITY
SEA LEVEL
SAVANNAH, GA.
AL ESCALANTE INSTALLER
AL ESCALANTE OWNER
NOTES: KEEP ON TRYING

THANK YOU VERY MUCH FOR ALL YOUR ASSISTANCE IT IS GREATLY APPRECIATED. YOU
GUYS ARE GREAT...

AL ESCALANTE


From: Mikedabike64@aol.com 2/26/2001 3:26 PM
Subject: from mikdabike64@aol.com
To:  info@factorypro.com

i bought a jet kit from factory for my 96 zx6e kawi myself and a friend installed it i was afraid to start it for fear of it NOT starting, boy was i wrong i guess i got lucky but there is no stumbling just crisp throttle response. i blocked off the emissions on it and was told that muzzy sells caps for that, anyway factory isn't popular in nj but i am gonna tell em all that was the easiest fix and no drilling of slides to boot u wanna drill buy  dyno jet, u wanna power buy factory. :)

Thanks, Mike!

Absolutely NO carb parts sold in California.

New and improved
Suzuki Teka SFI 2
with new TPS display and "MMT" Memory Module Tuner feature

Finally - Quick, easy, cost effective Suzuki tuning with no expensive "add-on boxes"
Suzuki cruisers and sportbikes

Please click here for more info

Contact Factory Pro
M-F, 9am - 5pm, Pacific time, -7 or -8 GMT

800 869-0497
 USA and Canada

415 491-5920

fax 415 492-8803

Factory Pro
179 Paul Drive
San Rafael, CA 94903
USA

If it's
4pm at Factory Pro it's 9am in eastern Australia.

parts information
 info@factorypro.com

EC997 dynamometer information
info@factorypro.com

Product Support /Tech SECTION
click here

And most importantly
Restart back at the HOME page and click on the red box in the top left to find the bike that you want parts for...

restart at HOME page

 

This Tuning Site has been visited by
  
people.
www.digits.net - the oldest counting service on the web
Clock widget          

 

 

LINKS

The below links are people and companies that are consistently impressive with their continual uniqueness and dedication to providing traditionally valued, quality products and services.
Marc
 


Flight Training - train with AMA race winner Todd Harrington.

The Harringtons own American Flyers, one of the most established flight training facilities in the USA - 8 locations -
 800-362-0808


Train to Win
The Rich Oliver Mystery School will help you discover your hidden inner strength. 
It will challenge you. It will teach you a new way of thinking and a new way of riding. You can take your riding to an exciting new level!  

We use a variety of proven drills and training techniques. 
Practicing these techniques with our Yamaha dirt track trainers will enhance your abilities both on the track or the street.  

It doesn't matter what you ride or race, the Rich Oliver Mystery School improves everyone's skill level and mindset!

WW2 vintage flying Special

Book a sightseeing flight over the Wine Country or a Kamikaze aerobatic flight or a biplane flight over famous Sonoma Raceway, the Golden Gate Bridge and the San Francisco Bay for one or two during the spring and get a free souvenir t shirt!
NEW!  Ask about the P-40 and P-51 flights!

707 938 2444

Just tell them that you saw this on the Factory Pro website!
Marc
Northern California's most unforgettable flying experience.  No experience required.  Open weekends! Call ahead in the winter.

Make your next tour Unforgettable,  Affordable and Exotic.
Superbike Tours Thailand - See you there.

Geoff@superbiketoursthailand.com
Supwebike Tours Thailand
The extension of the laboratory for engines of the Swiss Federal Institute of Technology was completed in about 1935. Its architect was Rudolf Otto Salvisberg (1882-1940). He had a successful career in Berlin but returned to Switzerland after the advent of the Nazis. His architectural style was somewhat similar to that of Erich Mendelsohn. The staircase of the laboratory is in normal use but well preserved.
Edited to the tunes of Chemical Residue by Herbie Hancock.
 

Artisan Crafted Fine Cheeses – Since 1865   -    Specializing in Handmade Brie & Camembert

Marin French Cheese Co., also known as The Cheese Factory and Rouge et Noir is not just the oldest cheese manufacturer in the country, but a vacationers and day trippers destination as well as a unique part of American History. Located north of San Francisco, east of Napa County, west of Pt. Reyes and Olema and south of Sonoma County, Marin French has produced hand crafted Artisan soft ripened cheese since 1865. Rouge et Noir cheeses are similar to French and European varieties but reflect the characteristics of Northern California, producing it's own regional style.