ZL1000  "Eliminator"
1987

 

All power products developed and tested on the EC997 Eddy Current Dynamometer using the
True Rear Wheel HP Scale

Finger and screwdriver adjustable fuel mixture screw kit

Long Boy Extended Fuel Screw
$89.95
pn: CRZ-SCR-3518k2
 with  new extended screws, springs, washers and o-rings

1. Choose your shipping method
2.
 

"Long Boy"
 Finger and screwdriver adjustable extended Fuel Screw assembly

Frustrated with trying to find an "almost 90 degree"  screwdriver to fine adjust your fuel screw for best idle and cruise?
Use Factory Pro's new "finger adjustable" fuel screw to adjust fuel screw for best throttle response. Traveling to high altitude? It's easy to lean out the lowend temporarily.

Make your life easier.

Installation:
Remove old short stock fuel screw, old o-ring, old washer and old spring. The o-ring might be stuck in the carb, so take a light and make sure it's really out  (or you can't find it after you took out the screw)
Use a small bent wire to pull it out if it doesn't drop out. Keep the old parts for "spares".

Screw assembly kit comes with:
 new extended screws
 new springs
 new washers
 new o-rings

part number description
Carb Recalibration Kit

Fir if running the stock airbox

CRB-K18-1.0 
$139.95

1. Choose your shipping method

2.
 

Adds more low-end / midrange. If the proper main jet is selected, more top-end power. Easy to install and tune - no slide drilling. Base settings for stock and aftermarket exhaust systems and slip-ons included along with the famous "Pink Sheet" -  Factory Pro's CV Tuning Guidelines for getting the tuning perfectly adjusted for the smoothest, most powerful machine possible.

This kit will allow tuning for each individual bike and exhaust system.
This is the kit of choice for on and off track - pulling stronger at part throttle and at full throttle.

Carb Recalibration Kit

carb kit
for if running individual air filters

CRB-K18-3.0  $149.95

1. Choose your shipping method

2.

 

Adds more low-end / midrange. If the proper main jet is selected, more top-end power. Easy to install and tune - no slide drilling. Base settings for stock and aftermarket exhaust systems and slip-ons included along with the famous "Pink Sheet" -  Factory Pro's CV Tuning Guidelines for getting the tuning perfectly adjusted for the smoothest, most powerful machine possible.

This kit will allow tuning for each individual bike and exhaust system.
This is the kit of choice for on and off track - pulling stronger at part throttle and at full throttle.
This kit is for use with individual filters in place of the stock airbox.

Ignition Advance, fixed

rtrs261rot.gif (47272 bytes)

RTR-KAW-4 (+5 degree)   $xx.xx

no longer made

1. Choose your shipping method

2.

 

Ignition Advance Rotor. Adds some power at ALL part throttle positions. That equates to more "snap" in throttle response for you! Easy to install. No adjustments required.

Pro Shift Detent Arm / Spring Kit

shift kit

SHFT-PRO-KAW-11/ZL1000   $139.95

1. Choose your shipping method

2.
 

Includes Factory Pro Microbearing Detent Arm, heavy duty detent spring and gasket. Makes shifting more positive at the expense of slightly stiffer shift lever action. The stronger detent spring rotates the shift drum quicker, so the gears are more likely to engage under quick shift conditions. Big improvement when quick shifts, especially from 1st to second are required. The Microbearing removes friction for the quickest shifting.
It's an inexpensive, absolutely reliable addition to your bike for better shifting.


Float Height setting tool

TL-FLOATHI

$59.95
The easiest way to set float height - important when tuning for max mileage.


 

 

New and improved
Suzuki Teka SFI 2
with new TPS display and "MMT" Memory Module Tuner feature

Finally - Quick, easy, cost effective Suzuki tuning with no expensive "add-on boxes"
Suzuki cruisers and sportbikes

Please click here for more info

Contact Factory Pro
M-F, 9am - 6pm, Pacific time, -7 or -8 GMT

800 869-0497
 USA and Canada

415 883-5620

fax 415 492-8803

parts information
 info@factorypro.com

EC997 dynamometer information
info@factorypro.com

Product Support /Tech SECTION
click here

 

Mailing / Shipping address:
Factory Pro
179 Paul Drive
San Rafael, CA 94903
USA

And most importantly
Restart back at the HOME page and click on the red box in the top left to find the bike that you want parts for...
restart at HOME page

 

This Tuning Site has been visited by
  
people.
www.gigits.com - the oldest counting service on the web

 

San Rafael and San Francisco

          

 

 

LINKS

The below links are people and companies that are consistently impressive with their continual uniqueness and dedication to providing traditionally valued, quality products and services.
Marc
 


Train to Win
The Rich Oliver Mystery School will help you discover your hidden inner strength. 
It will challenge you. It will teach you a new way of thinking, and a new way of riding. You can take your riding to an exciting new level!  

We use a variety of proven drills and training techniques. 
Practicing these techniques with our Yamaha dirt track trainers will enhance your abilities both on the track or the street.  

It doesn't matter what you ride or race, the Rich Oliver Mystery School improves everyone's skill level and mindset!

Factory Pro Springr Special

Book a sightseeing flight over the Wine Country or a Kamikaze aerobatic flight or a biplane flight over Infineon Raceway, the Golden Gate Bridge and the San Francisco Bay for one or two during the spring and get a free souvenir t shirt!
(NEW!  Ask about the P-40 flights!)

707 938 2444

Just tell them that you saw this on the Factory Pro website!
Marc

Northern California's most unforgettable flying experience.  No experience required.  Open weekends!

The Military Vehicle Technology Foundation was founded by the late Jacques Littlefield. It is located in Portola Valley, just south of San Francisco.

The Military Vehicle Technology Foundation oversees one of the largest and most significant collections of historical military vehicles in the world. Our goal is to acquire, restore, and interpret the historical significance of 20th and 21st century military vehicles. Domestic and foreign combat vehicles such as tanks, armored cars, self-propelled artillery, and other technically interesting mobile platforms are the focus of the collection. We also maintain an extensive technical library that describes many vehicles down to the part level. Aside from the vehicles, there are towed artillery, antitank, and antiaircraft guns. Military support equipment, inert ordnance, and accessories round out the collection.

There are over 200 vehicles in the Foundation's collection, many of them exceedingly rare. The updated site will have greatly increased content and information on the collection, as well as information on how to book tours or arrange access for commercial purposes.     To arrange and schedule a Tour.
 

The extension of the laboratory for engines of the Swiss Federal Institute of Technology was completed in about 1935. Its architect was Rudolf Otto Salvisberg (1882-1940). He had a successful career in Berlin but returned to Switzerland after the advent of the Nazis. His architectural style was somewhat similar to that of Erich Mendelsohn. The staircase of the laboratory is in normal use but well preserved.
Edited to the tunes of Chemical Residue by Herbie Hancock.

Artisan Crafted Fine Cheeses – Since 1865   -    Specializing in Handmade Brie & Camembert

Marin French Cheese Co., also known as The Cheese Factory and Rouge et Noir is not just the oldest cheese manufacturer in the country, but a vacationers and day trippers destination as well as a unique part of American History. Located north of San Francisco, east of Napa County, west of Pt. Reyes and Olema and south of Sonoma County, Marin French has produced hand crafted Artisan soft ripened cheese since 1865. Rouge et Noir cheeses are similar to French and European varieties but reflect the characteristics of Northern California, producing it's own regional style.