GPX600R

ZX600C Ninja 600R

88-99

 


Finger and screwdriver adjustable fuel mixture screw kit

Long Boy Extended Fuel Screw
$89.95
pn: CRZ-SCR-3518k2
 with  new extended screws, springs, washers and o-rings

1. Choose your shipping method
2.

"Long Boy"
 Finger and screwdriver adjustable extended Fuel Screw assembly

Frustrated with trying to find an "almost 90 degree"  screwdriver to fine adjust your fuel screw for best idle and cruise?
Use Factory Pro's new "finger adjustable" fuel screw to adjust fuel screw for best throttle response. Traveling to high altitude? It's easy to lean out the lowend temporarily.

Make your life easier.

Installation:
Remove old short stock fuel screw, old o-ring, old washer and old spring. The o-ring might be stuck in the carb, so take a light and make sure it's really out  (or you can't find it after you took out the screw)
Use a small bent wire to pull it out if it doesn't drop out. Keep the old parts for "spares".

Screw assembly kit comes with:
 new extended screws
 new springs
 new washers
 new o-rings

Factory Pro Carb Jetting Kits


CRB-K01-1.0    $139.95 USD


buy carb kit only $129.95
International buyers will be billed $18 additional for USPS Global Express shipping

 


Carb kit AND ignition advancer $159.95
International buyers will be billed $18 additional for USPS Global Express shipping

Carb jetting Kit  for stock airbox
You can use a stock or aftermarket stock replacement air fllter.

Buy this carb kit and get an ignition advance for only $30!
($159.95 retail value)

Make sure you mention this when you order!

800 869-0497
(m-f 9-6 pac time)

standard drop-in kit, no drilling
Celmat30 needles

Carb Recalibration Kit tm

CRB-K01-3.0   $129.95


buy carb kit only $129.95
International buyers will be billed $18 additional for USPS Global Express shipping

 

CRB-K01-3.0 AND 4 air filters  $259.90


buy carb kit AND 4 Air Filters $249.95
Save $9.90
International buyers will be billed $18 additional for USPS Global Express shipping

 

Drop-in kit, no slide drilling - for individual
air filters
Celmat30 needles

This is the kit that you use to jet the carbs when you take off the airbox and run 4 individual air filters.

Ignition Advancer

RTR-KAW-1  $74.95 USD


International buyers will be billed $18 additional for USPS Global Express shipping

More part throttle power, better mileage - improves mountain and 2-up riding. Mild +4.
Works well with street pump fuel. Does not require "race gas".

Takes about 30 minutes to install with only hand tools.

Kawasaki 600 Notes:
There is a heck of a lot of Kawasaki 600 models and it's not uncommon to buy ignition advancers for the wrong model Kaw 600.
One good thing is that all the rotors definitely look different.
Your new ignition rotor should almost identical to the one you are replacing - as far as size and number of "points". If it's visibly different in size or number of "points", then look at your VIN plate and it will tell you which model you have. In this case, you can read "ZX600C" right on the VIN plate.
Don't try to install the wrong rotor.

Float Height setting tool

TL-FLOATHI

$59.95


International buyers will be billed $18 additional for USPS Global Express shipping
The easiest way to set float height - important when tuning for max mileage.

Click here to open a new window and
go to Factory Pro's Performance Friction Brakes page
Subject: Stuff
Date: Sun, 23 May 1999 12:53:20 -0400
From: "BillCalifano" <BillCalifano@email.msn.com>
To: <factory2@ix.netcom.com>

I have a 1991 Kawasaki ZX-6 with a Muzzy 4 into1, Factory jet kit, and a Factory 4 Degree advancer and man does this bike fly! It's tough to beat with a top speed of 155 mph! Please send some stickers for my bike and a patch for my jacket if available. I bought this bike totally stock and your products have definitely made it go faster! Thanks!
 

 

 

Absolutely NO carb parts sold in California.

New and improved
Suzuki Teka SFI 2
with new TPS display and "MMT" Memory Module Tuner feature

Finally - Quick, easy, cost effective Suzuki tuning with no expensive "add-on boxes"
Suzuki cruisers and sportbikes

Please click here for more info

Contact Factory Pro
M-F, 9am - 5pm, Pacific time, -7 or -8 GMT

800 869-0497
 USA and Canada

415 491-5920

fax 415 492-8803

Factory Pro
179 Paul Drive
San Rafael, CA 94903
USA

If it's
4pm at Factory Pro it's 9am in eastern Australia.

parts information
 info@factorypro.com

EC997 dynamometer information
info@factorypro.com

Product Support /Tech SECTION
click here

And most importantly
Restart back at the HOME page and click on the red box in the top left to find the bike that you want parts for...

restart at HOME page

 

This Tuning Site has been visited by
  
people.
www.digits.net - the oldest counting service on the web
Clock widget          

 

 

LINKS

The below links are people and companies that are consistently impressive with their continual uniqueness and dedication to providing traditionally valued, quality products and services.
Marc
 


Flight Training - train with AMA race winner Todd Harrington.

The Harringtons own American Flyers, one of the most established flight training facilities in the USA - 8 locations -
 800-362-0808


Train to Win
The Rich Oliver Mystery School will help you discover your hidden inner strength. 
It will challenge you. It will teach you a new way of thinking and a new way of riding. You can take your riding to an exciting new level!  

We use a variety of proven drills and training techniques. 
Practicing these techniques with our Yamaha dirt track trainers will enhance your abilities both on the track or the street.  

It doesn't matter what you ride or race, the Rich Oliver Mystery School improves everyone's skill level and mindset!

WW2 vintage flying Special

Book a sightseeing flight over the Wine Country or a Kamikaze aerobatic flight or a biplane flight over famous Sonoma Raceway, the Golden Gate Bridge and the San Francisco Bay for one or two during the spring and get a free souvenir t shirt!
NEW!  Ask about the P-40 and P-51 flights!

707 938 2444

Just tell them that you saw this on the Factory Pro website!
Marc
Northern California's most unforgettable flying experience.  No experience required.  Open weekends! Call ahead in the winter.

Make your next tour Unforgettable,  Affordable and Exotic.
Superbike Tours Thailand - See you there.

Geoff@superbiketoursthailand.com
Supwebike Tours Thailand
The extension of the laboratory for engines of the Swiss Federal Institute of Technology was completed in about 1935. Its architect was Rudolf Otto Salvisberg (1882-1940). He had a successful career in Berlin but returned to Switzerland after the advent of the Nazis. His architectural style was somewhat similar to that of Erich Mendelsohn. The staircase of the laboratory is in normal use but well preserved.
Edited to the tunes of Chemical Residue by Herbie Hancock.
 

Artisan Crafted Fine Cheeses – Since 1865   -    Specializing in Handmade Brie & Camembert

Marin French Cheese Co., also known as The Cheese Factory and Rouge et Noir is not just the oldest cheese manufacturer in the country, but a vacationers and day trippers destination as well as a unique part of American History. Located north of San Francisco, east of Napa County, west of Pt. Reyes and Olema and south of Sonoma County, Marin French has produced hand crafted Artisan soft ripened cheese since 1865. Rouge et Noir cheeses are similar to French and European varieties but reflect the characteristics of Northern California, producing it's own regional style.