V Stack Install
(This is the same install  as the 03-14)
Remove tank cover.

Flip gray latch on ECU and unplug the two connectors.

Remove ECU.
Unbolt tank mounts and prop tank out of the way.
Unplug gray connector.
Remove screws and lift off airbox top.
Unscrew air filter mounting screws and lift out air filter.
(How about a new BMC filter?)
Use a GOOD short #2 Philips and remove the stock velocity stack screws.
Install your new Factory Pro Superflare V Stacks
Reassemble everything in reverse order! Make sure you use a factory Honda service manual for installation. All instructions are for general information, not specific.